The Best Environmentally Friendly Attic Insulation

I use this exact spray foam for my attic insulation and it has worked perfectly. I recommend everyone switch to spray foam it is just better and good for the environment.

Fiberglass insulation is more eco-friendly than any other insulations. Upto 60% of it is made of recycled glass, it lasts for around 100 years, it is cheap and it provides decent thermal resistance. A close contender is cellulose insulation which is made of recycled paper but it will last only for a maximum of 30-years making it less sustainable than fiberglass. Among fiberglass insulation, the EcoBatt insulation is the most environmentally friendly. It uses a plant-based technology replacing the harmful formaldehyde. It is also free of any red-listed chemicals and uses no added dyes. In addition, this insulation is better refined so it won’t produce as much dust as a normal fiberglass batt. For these reasons, I suggest Knauf EcoBatt insulation for attics.

This insulator roll is easy to cut and install, it is very durable and lightweight. It is excellent for soundproofing and is very friendly to the skin. It doesn’t irritate the skin or cause allergic reactions. It is perfect for insulating your attic.

This product inhibits condensation, it is not toxic, and doesn’t provoke allergic reactions. It keeps the heat out, leaving your attic cool. It is very easy to cut, install and is durable.

This product is very safe and easy to use, isn’t easily flammable, and does not soak up. It is breathable and highly reflective, keeping the heat out and leaving your attic cool. It is good for soundproofing, and does not cause any allergic reactions.

The most common kind of fiberglass insulation is batts, but rigid boards are also sometimes available. Because it is constructed of glass, it has a relatively small environmental impact and provides good soundproofing and an R-value. Fiberglass shouldn’t be used in basements, humid areas, or against a cold concrete wall because it is also moisture-sensitive.

Cotton insulation (denim) is manufactured in batts, uses little energy, and is almost entirely made of recyclable materials. Thanks to a non-toxic boron-based fire retardant treatment, it is simple to install, non-toxic, and resistant to mold, bugs, and fungus in addition to fire. Cotton batting insulation is also fantastic for colder areas, especially in windy conditions.

Bales of straw wind up being a great, environmentally friendly choice. They have an R-value of 40, are both carbon sinks, and are entirely recyclable and recyclable. Designing your home so you can fit in standard-sized stacked bales, which you would then painstakingly cover in mud, was once required for straw bale insulation.

Fiberglass insulation is comparable to a Big Mac from McDonald’s in terms of insulation: it’s not the best option, but it’s unquestionably the most popular. In the case of carefully made high-density fiberglass, its R-Value ranges from as low as 2.2 to as high as 4.3. As a result, it typically performs the worst in attic insulation. It is simple to trace that it has been a standard in new insulation building and gut renovations similar to those on Extreme Home Makeover.

Cellulose insulation is typically made of recycled paper or wood, and producers frequently advertise it. Despite slightly more recycled material than other attic insulation options, cellulose does not pass a comprehensive green analysis of its environmental impact.

The wall and floor of your attic can be easily and affordably insulated with blanket insulation. To insulate the attic from heat and cold, thick pieces of insulation are cut into slices and put securely between the spaces in wooden frames or around pipes, wires, and other obstructions. The indoor air quality of your home may be impacted by this attic floor and wall insulation. Therefore, it’s crucial to avoid it in open areas.